Restore Factory Handling Dynamics While Gaining Adjustable Ground Clearance on Your 2022–2025 Toyota Tundra

This complete Stage 1 front suspension system installs directly beneath the hood or cab area to replace worn coil springs and shocks, delivering precise climb capability and composed weight transfer across varied loads.

Built around ICON’s 3.0 series architecture, each strut features a precision‑machined aluminum outer body that dissipates heat efficiently during sustained compression cycles. Adjustable ride‑height collars allow linear lifting between 1.25 and 3.25 inches, matching your preferred bumper line and wheel clearance without introducing unwanted alignment changes or accelerating CV joint stress. Upper mounting interfaces use high‑strength spherical bearings rather than traditional elastomer bushings, removing slack from the steering linkage and returning crisp feedback during both highway lane changes and trail crawling.

• Billet aluminum 3.0 construction resits denting, scratching, and moisture exposure common in off‑highway environments.
• Threaded adjuster housings provide exact lift selection across a 1.25 to 3.25 inch range, eliminating spacer stacking and preserving suspension travel.
• Monoball upper hardware eliminates chassis flex at the pivot point, translating directly into improved cornering stability and reduced wandering.
• Stage 1 valve damping matches OEM spring frequencies for compliant city commuting while still absorbing whoops and rut impacts.
• OEM replacement bracket patterns guarantee straightforward removal of factory components and secure fastening using conventional socket sets.

Fabricated exclusively for 2022 through 2025 Toyota Tundra platforms, this kit operates within original geometric routing so that brake lines, ABS tone rings, and steering splines remain untouched. Sealed polyurethane dust wipers protect the chrome shaft and internal seals from abrasive grit and road salt, extending service intervals under routine exposure. Regular torque verification of the upper castle nuts and lower ball joints maintains safe operating parameters, and the protective powder coat requires only periodic rinsing to prevent surface staining from mineral deposits.