Goose Gear Rear Plate System for Toyota Sequoia (2008–2022 2nd Gen) – Large Under‑Deck Storage
The Goose Gear Rear Plate System for the Toyota Sequoia 2008–2022 2nd Gen. creates a stable, level top deck with expansive storage below, making it Goose Gear’s largest interior plate to date. Its generous under‑deck space accommodates drawers or can be left open for maximum cargo capacity. Installation requires removing the entire 3rd row seat, and the plate mounts to the vehicle using existing holes and factory anchor points—no drilling or cutting needed. Four lockable hatch doors with compression latches deliver secure access, while the deck sits roughly 8 inches above the base floor to maintain clearance for top‑side gear and to leverage pre‑installed anchors for Goose Gear modules. Module depths up to 30 inches are supported, still allowing access to forward hatches. Ideal for CampKitchen 2.1 or 2.2 configurations, this plate is designed to work with a wide range of Goose Gear modules. Please note: fit has been tested with a 2011 Sequoia Platinum; verify compatibility for your exact year/trim before purchase. The unit ships by truck freight with crating included, and carries Legacy SKU PSEQ-2-PLAT.
- No‑drill installation using existing holes and factory anchors; 3rd‑row seat must be removed to install.
- Four lockable hatch doors with compression latches provide secure, weather‑resistant access to gear below.
- Deck sits approximately 8" above the base floor, delivering a level top surface with ample clearance below.
- Massive below‑deck storage with optional drawers and compatibility with Goose Gear modules via pre‑installed anchor points.
- Module depths up to 30" are supported while keeping access to forward hatches; compatible with CampKitchen 2.1/2.2 setups.
- Fit verification guidance: tested on a 2011 Sequoia Platinum; confirm compatibility for your model year/trim before ordering; ships via truck freight with crating included.
