King Shocks KIN33401-001 Mounting Plates for Ford Raptor
Upgrade your F-150 Raptor’s suspension geometry with a direct-bolt-on mounting solution that securely anchors aftermarket King shocks without shifting factory alignment points.
- Machined from solid 6061-T6 aluminum billet to eliminate the microscopic porosity and stress fractures common in stamped OE steel brackets.
- Bolts directly onto factory upper control arm mounting tabs, meaning zero cutting, grinding, or welding is required on the stock knuckle.
- Measured at exactly 10 x 10 x 4 inches, keeping bulk within OEM engine bay clearances while providing adequate space for shock body movement.
- Weighs 3 pounds maximum, reducing unsprung mass so updated damping curves react instantly to rocks whoops rather than fighting heavy dead weight.
- Features matched hole spacing calibrated specifically for K-Series shock flanges, preventing cross-threading and eliminating lateral play during high-speed runs.
- Finished with industrial-grade anodization that repels track mud and road salts, protecting threads and contact surfaces across repeated wash downs.
Factory brackets routinely crack when drivers install wider-profile shocks to regain lost ride height. By transferring vertical impact loads directly from the shock housing into the reinforced knuckle via these plates, your vehicle maintains static caster and camber throughout full droop cycles. Install the bracket with your existing upper A-frame hardware, route lines away from moving parts, and drive with confidence knowing your upgrade handles trail abuse without requiring periodic retorquing.
