Engineered for direct bolt-on installation on 2010–2018 RAM 2500/3500 trucks, the Go Rhino BR20.5 rear bumper replaces factory corrosion with a high-capacity, textured black tubular steel assembly built for years of heavy towing and worksite abrasion.

• OEM-Aligned Mounting Geometry: Verified against the Gen IV Ram frame rail patterns, the bracket system aligns flush with factory holes, eliminating drilling, bending, or custom fabrication during swap-out.
• Structural Load Capacity: At 111 pounds total mass with an 80 × 19 × 13 inch footprint, the reinforced cross-tube distributes impact forces evenly across the chassis, supporting heavy receivers, tire carriers, and cargo racks without flex.
• Textured Black Powder Coat Armor: The baked-on finish bonds directly to prep-treated steel, blocking road salt oxidation, gravel spatter, and chemical exposure so the surface survives coastal, desert, and northern winter routes.
• Tailgate & Wiring Shield: Raised lip geometry clears the factory lift gate track while routing around OEM lighting connectors, protecting vulnerable harnesses and paintlines from scrape damage during routine hauling.
• Integrated Accessory Mounting Points: Center channel features pre-punched reinforcement holes ready for license plate brackets, D-ring extraction anchors, LED light bars, and recovery shackles.
• Direct Replacement Workflow: Drops in as a complete drop-in unit using existing nuts and bolts, typically clearing full installation in under three hours when followed by standard torque specifications.

Unlike thin stamped replacements that crack at weld seams, the BR20.5 maintains factory ride height and approach angles while delivering genuine impact absorption. Sourced through certified distributors, every unit ships with matched hardware and verified dimensional tolerances. Backed by Go Rhino’s manufacturer warranty and dedicated fitment protocols, this bumper restores structural continuity to aging bed frames without compromising day-to-day drivability or resale aesthetics.