{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2022-no-bull-bar-raw-unfinished","title":"C4 Fabrication Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cdiv\u003e\n\u003cp\u003eMeet the C4 Fabrication Tundra Overland Series Front Bumper for 3rd Gen Toyota Tundra (2022+). Built for serious off-road and overland adventures, it delivers rugged front-end protection, versatile lighting options, and seamless integration with your truck’s safety systems. This bumper prioritizes safety tech compatibility while expanding recovery and accessory capacity.\u003c\/p\u003e\n\u003cp\u003eThis design preserves the Toyota Safety Sense System (TSS), park sensors, and the front-mounted camera. All bull bar options remain compatible with TSS, with thoughtful considerations for camera visibility and sensor behavior during installation and use.\u003c\/p\u003e \u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eRetains full functionality of Toyota Safety Sense (TSS), park sensors, and front camera. All bull bar options are compatible with TSS. Note: some TSS recalibration may be required after installation if sensors are moved from their original location.\u003c\/li\u003e \u003cli\u003eCamera and sensor guidance: Low-Height and Mid-Height bull bars may appear in the camera view but do not fully obstruct visibility; ensure proper sensor orientation per the install video and level the vehicle for optimal sensor performance.\u003c\/li\u003e \u003cli\u003eLighting readiness: Designed to fit a 40\" single-row Baja Designs S8 light bar. Light cutouts are a fixed feature and cannot be removed.\u003c\/li\u003e \u003cli\u003eFog light compatibility: Accepts one pair of Baja Designs Squadron fog lights; OE fog lights cannot be reused.\u003c\/li\u003e \u003cli\u003eLP9 compatibility: Will fit LP9s on all options except the low bar; bumper is not pre-drilled for these lights.\u003c\/li\u003e \u003cli\u003eInstallation notes: Requires cutting the plastic bumper panels under the headlights on both sides and trimming the end of the fender flares to install. An install video provides detailed, step-by-step guidance. Bumper includes holes to reattach factory fender liners.\u003c\/li\u003e \u003cli\u003eProtection and recovery: Includes a front skid plate replacing the factory plastic skid plate and 3\/4\" thick welded D-Ring tabs (front and back).\u003c\/li\u003e \u003cli\u003eConstruction: 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" mounting plates and 1\/4\" winch plate; bull bar tubing is.120\" wall with 1 3\/4\" and 1 1\/2\" HREW tubing. Designed to accommodate winches typically in the 8k-12k size range (verified fitments listed).\u003c\/li\u003e \u003cli\u003eWinch compatibility: Fits most 8k-12k winches; verified fitments include WARN VR and ZEON 10k\/12k. Does not fit Smitty XRC 12k. For best results, use a synthetic rope with a hawse-style fairlead; some roller fairleads may be too large for the recessed fairlead plate.\u003c\/li\u003e \u003cli\u003eWeights and handling: 160 lbs (no bull bar), 168 lbs (low bull bar), 174 lbs (mid height with gussets), 182 lbs (full bull bar with headlight hoops).\u003c\/li\u003e \u003cli\u003eFinish option: Unless you select the powder-coated option, the bumper will need to be painted or powder-coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eDesigned for 3rd Gen Toyota Tundra (2022+).\u003c\/li\u003e \u003cli\u003eSupports a 40\" Baja Designs S8 single-row light bar with dedicated cutouts.\u003c\/li\u003e \u003cli\u003eLP9 light compatibility across most configurations (except low bar) with pre-drilled requirements noted.\u003c\/li\u003e \u003cli\u003eRequires cutting of factory bumper panels under headlights and trimming of fender flare ends for installation.\u003c\/li\u003e \u003cli\u003eIncludes mounting provisions to reattach factory fender liners.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eConstruction and Durability\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eMaterial: 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" mounting plates and 1\/4\" winch plate.\u003c\/li\u003e \u003cli\u003eStructural strength: 3\/4\" thick D-Ring tabs, fully welded front and back.\u003c\/li\u003e \u003cli\u003eFinish: Optional powder coat; otherwise, paint or powder coat before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eLighting, Winch, and Accessories\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eLighting readiness: 40\" single-row Baja Designs S8 light bar ready; fixed light-cutouts cannot be removed.\u003c\/li\u003e \u003cli\u003eFog lights: Accommodates Baja Designs Squadron fog lights; OE fog lights are not reusable.\u003c\/li\u003e \u003cli\u003eWinch compatibility: 8k–12k winches supported; WARN VR and ZEON 10k\/12k verified; Smitty XRC 12k not supported.\u003c\/li\u003e \u003cli\u003eFairlead and rope: Synthetic rope with hawse fairlead recommended; some roller fairleads may exceed space in the recessed area.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eInstallation involves cutting plastic bumper panels and trimming fender flare ends; refer to the detailed install video for step-by-step guidance.\u003c\/li\u003e \u003cli\u003eSensor and camera considerations: Ensure parking sensors are oriented correctly and the vehicle sits level for optimal sensor performance; excessive forward rake may cause higher sensitivity or intermittent activations.\u003c\/li\u003e \u003cli\u003eMaintenance: If not ordered with a powder-coated finish, repaint or recoat to prevent rust over time.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eUse Case Scenarios\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eOverland and expedition builds that require serious front-end protection, recovery points, and lighting capability without compromising safety systems.\u003c\/li\u003e \u003cli\u003e trucks equipped for rock crawling, remote travel, or desert crossings where winch-ready capability and robust construction are advantageous.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920918249532,"sku":"1400-3122-NB","price":1994.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1400-3122-NB.01.jpg?v=1781645821","url":"https:\/\/autoexpedition.com\/products\/tundra-overland-series-front-bumper-3rd-gen-2022-no-bull-bar-raw-unfinished","provider":"Auto Expedition","version":"1.0","type":"link"}