{"title":"Rear Bumpers","description":"Products in the Rear Bumpers category","products":[{"product_id":"toyota-4runner-swing-arm-rear-bumper-2010-2024","title":"CBI Toyota 4Runner Swing Arm Rear Bumper | 2010-2024","description":"\u003cspan style=\"font-weight: 400;\"\u003eIntroducing the 5th Gen Toyota 4Runner Swing Arm Rear Bumper, a versatile solution designed to elevate both form and function for your vehicle. This innovative\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e 4Runner swing-out bumper \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003efeatures a dual swing arm configuration, providing convenient access to the rear while accommodating either a straight or angled tire carrier based on your preferences. \u003c\/span\u003e\r\\n\r\\n\u003cspan style=\"font-weight: 400;\"\u003eThe\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e 4 Runner swing-out bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e is available in both bare metal or powder coat black options, this bumper allows you to tailor its look to match your style. While installation does require cutting plastic fenders, the benefits are significant. With an increased departure angle, your vehicle gains improved off-road capabilities. The integrated receiver hitch, although not load-rated, enhances the bumper's utility.\u003c\/span\u003e\r\\n\r\\n\u003cspan style=\"font-weight: 400;\"\u003eMoreover, the design seamlessly follows the original 4Runner body lines, guaranteeing a flawless fit that complements the vehicle's aesthetics. It's important to note that the \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e4Runner swing-out bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e is incompatible with BSM and Rear cross-traffic sensors, making it a choice for those prioritizing functionality over certain driver-assistance features. Embrace the enhanced capabilities and rugged charm this \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eswing-out bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e brings to your 4Runner's adventure-ready persona.\u003c\/span\u003e\r\\n\r\\n\u003cspan style=\"font-weight: 400;\"\u003eKey Features:\u003c\/span\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e5th Gen Toyota 4Runner Swing Arm Rear Bumper\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDual Swing Arm\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eStraight or Angled Tire Carrier\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBare Metal or Powder Coat Black\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRequires cutting plastic fenders\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased departure angle\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIntegrated receiver hitch (not load-rated)\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFollows original 4Runner body lines for a perfect fit\u003c\/span\u003e\u003c\/li\u003e\r\\n\u003c\/ul\u003e\r\\n\u003cstrong\u003e***Not compatible with BSM and Rear cross-traffic sensors\u003c\/strong\u003e\r\\n\r\\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=pSj6h5DPHqg\u0026amp;t=156s\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg class=\"alignnone wp-image-142651 size-full\" src=\"https:\/\/cbioffroadfab.com\/wp-content\/uploads\/Videopng-2.png\" alt=\"\" width=\"150\" height=\"62\"\u003e\u003c\/a\u003e","brand":"CBI","offers":[{"title":"Straight \/ Bare Metal","offer_id":43831837524028,"sku":"200-000-011-179","price":3220.0,"currency_code":"USD","in_stock":true},{"title":"Angled \/ Bare Metal","offer_id":43831837556796,"sku":"200-000-011-180","price":3220.0,"currency_code":"USD","in_stock":true},{"title":"Angled \/ Powder Coat Black","offer_id":43831837589564,"sku":"200-000-011-182","price":3570.0,"currency_code":"USD","in_stock":true},{"title":"Straight \/ Powder Coat Black","offer_id":43831837622332,"sku":"200-000-011-181","price":3570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/T4R5-Rear-Dual_swing-e1580596676954.jpg?v=1768209954"},{"product_id":"chevy-colorado-rear-bumper-z71-zr2-2017-2022","title":"CBI Chevy Colorado Rear Bumper | Z71 \u0026 ZR2 2017-2022","description":"\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eThe CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper. Couple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look awesome too?\u003c\/span\u003e\r\\n\r\\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003e\r\\nDetails:\r\\n\u003c\/span\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eChevy Colorado Rear Bumper Z71 and ZR2 2017-2022\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eNo Swing Arms\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eBare Metal\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eFully integrated high clearance hidden receiver hitch with fold up license plate mount\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eBumper mounts directly to the frame utilizing factory holes (No Drilling)\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eGreatly increased departure angle across the entire back side of the bumper as compared to stock\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eFully gusseted wings and center section of the bumper\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\r\\n\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The CBI Offroad Colorado rear bumper is a great replacement option for those looking for the much-needed increase in clearance and departure angle and for those looking for a rear bumper that is significantly stronger than the factory rear bumper.\\\\nCouple that with added 3\/4 inch recover points and the option to add a rear swing arm tire carrier and you could have the ultimate off-road, go anywhere, overland Colorado! Did we mention our bumpers make your truck look Awesome too!\\\\nDetails\\\\nChevy Colorado Rear Bumper Z71 and ZR2\\\\nNo Swing Arms\\\\nBare Metal\\\\nFull steel construction with 3\/16 inch plating and 1\/4 inch mounting\\\\nFully integrated high clearance hidden receiver hitch with fold up license plate mount\\\\nBumper mounts directly to the frame utilizing factory holes (No Drilling)\\\\nGreatly increased departure angle across the entire back side of the bumper as compared to stock\\\\nFully gusseted wings and center section of the bumper\\\\nBumper utilized factory 7 pin\/4 pin wiring harness and factory license plate lights\\\\nIntegrated 3\/4 inch recover tabs that mount directly off of the frame of the truck for secure recoveries\\\\nBumper weight is 90lbs (Factory bumper, receiver, and components are 65 lbs)\\\\nVertical or angled tire mount\"}' data-sheets-userformat='{\"2\":6528,\"10\":2,\"11\":4,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eVertical or angled tire mount\u003c\/span\u003e\u003c\/li\u003e\r\\n\u003c\/ul\u003e","brand":"CBI","offers":[{"title":"No Swing Arms \/ Bare Metal \/ No Swing Arms","offer_id":43831842439228,"sku":"200-000-018-009","price":1450.0,"currency_code":"USD","in_stock":true},{"title":"No Swing Arms \/ Powder Coat Black \/ No Swing Arms","offer_id":43831842471996,"sku":"200-000-018-010","price":1650.0,"currency_code":"USD","in_stock":true},{"title":"Dual Swing Arm \/ Bare Metal \/ Straight","offer_id":43831842504764,"sku":"200-000-018-026","price":3200.0,"currency_code":"USD","in_stock":true},{"title":"Dual Swing Arm \/ Bare Metal \/ Angled","offer_id":43831842537532,"sku":"200-000-018-011","price":3200.0,"currency_code":"USD","in_stock":true},{"title":"Dual Swing Arm \/ Powder Coat Black \/ Straight","offer_id":43831842570300,"sku":"200-000-018-027","price":3550.0,"currency_code":"USD","in_stock":true},{"title":"Dual Swing Arm \/ Powder Coat Black \/ Angled","offer_id":43831842603068,"sku":"200-000-018-012","price":3550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/DSC_0292-e1580710106256.jpg?v=1768209996"},{"product_id":"toyota-tacoma-rear-bumper-camera-relocation-bracket-2016-2023","title":"CBI Toyota Tacoma Rear Bumper Camera Relocation Bracket | 2016-2023","description":"\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Rear Bumper Camera Relocation Bracket\\\\nCompatible with 2016-2020 Toyota Tacoma models\\\\nPowder coated with satin black texture\"}' data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":4,\"12\":0}'\u003eRear Bumper Camera Relocation Bracket\r\\nCompatible with 2016-2022 Toyota Tacoma models\r\\nPowder coated with satin black texture\u003c\/span\u003e\r\\n\r\\n\u003cstrong\u003e***Designed to fit with CBI bumpers\u003c\/strong\u003e","brand":"CBI","offers":[{"title":"Default Title","offer_id":43831845388348,"sku":"600-000-000-082","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/Tacoma-Backup-Camera-Mount-1.jpg?v=1768210022"},{"product_id":"toyota-4runner-classic-rear-bumper-2010-2024","title":"CBI Toyota 4Runner Classic Rear Bumper | 2010-2024","description":"\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The 5th Gen. 4Runner rear bumper package is the best that CBI Offroad Fab offers to take your 4Runner to the next level. This package offers specifically designed components with the true recreationally insane enthusiast in mind.\\\\nIt gives your 4Runner the best in looks and vehicle protection money can buy! Receiver hitch included (not load rated).\"}' data-sheets-userformat='{\"2\":7041,\"3\":{\"1\":0},\"10\":2,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eThe 5th Gen. 4Runner rear bumper package is the best that CBI Offroad Fab offers to take your 4Runner to the next level. This package offers specifically designed components with the true recreationally insane enthusiast in mind.\r\\nIt gives your 4Runner the best in looks and vehicle protection money can buy! Receiver hitch included (not load rated).\u003c\/span\u003e","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831848206396,"sku":"200-000-011-191","price":1800.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831848239164,"sku":"200-000-011-192","price":2050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/5th-Gen-Toyota-4Runner-Rear-Bumper-2010-2020.jpg?v=1768210043"},{"product_id":"2nd-gen-toyota-tundra-rear-bumper-2014-2021","title":"CBI 2nd Gen Toyota Tundra Rear Bumper | 2014-2021","description":"\u003cspan data-sheets-value=\"{\u0026quot;1\u0026quot;:2,\u0026quot;2\u0026quot;:\u0026quot;The all-new 2nd Generation Toyota Tundra Rear Bumper is engineered with steep trails and rugged terrain in mind. We know it's not always easy driving a full-size rig offroad, so we constructed this awesome bumper to seriously improve your vehicle's rear exit angle - making it much easier to descend in steep areas and less risky to drop on your backend.\\\\nIn addition to better performance, the steel construction adds incredible strength and durability to your truck's tail, offering additional recovery points and mounting options for superior functionality.\\\\nYou can even add lights to improve visibility all around your vehicle. This is definitely the rear bumper you've been waiting for!\u0026quot;}\" data-sheets-userformat='{\"2\":7041,\"3\":{\"1\":0},\"10\":2,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Arial\"}'\u003eThe all-new 2nd Generation Toyota Tundra Rear Bumper is engineered with steep trails and rugged terrain in mind. We know it's not always easy driving a full-size rig offroad, so we constructed this awesome bumper to seriously improve your vehicle's rear exit angle - making it much easier to descend in steep areas and less risky to drop on your backend.\r\\nIn addition to better performance, the steel construction adds incredible strength and durability to your truck's tail, offering additional recovery points and mounting options for superior functionality.\r\\nYou can even add lights to improve visibility all around your vehicle. This is definitely the rear bumper you've been waiting for!\u003c\/span\u003e","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831855054908,"sku":"200-000-012-013","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831855087676,"sku":"200-000-012-014","price":2070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/TOP.jpg?v=1768210076"},{"product_id":"toyota-tundra-swing-arm-rear-bumper-2014-2021","title":"CBI Toyota Tundra Swing Arm Rear Bumper | 2014-2021","description":"Add some protection and style to the rear end of your Tundra with the swing arm rear bumper. Check out the key features below.\r\\n\u003cul\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSame great bumper now with swing arms! \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eProvides protection and additional recovery points \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFollows factory lines for a perfect fit\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eClears factory receiver hitch \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCompatible with factory parking sensors and 2018-2021 BSM sensors (BSM Sensor may require professional recalibration after installation)\" \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSteel body construction with aluminum traction plates\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCut-outs for additional flush fit lights (BAJA DESIGNS S2 PATTERN, RIGID SR-M )\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSwing arms are completely removable \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSwing arms are constructed from formed 10GA Steel for optimal weight\/strength \u003c\/span\u003e\u003c\/li\u003e\r\\n\u003c\/ul\u003e","brand":"CBI","offers":[{"title":"Powder Coat Black \/ Angled","offer_id":43831870324796,"sku":"200-000-012-022","price":3820.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ Angled","offer_id":43831870357564,"sku":"200-000-012-021","price":3420.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black \/ Straight","offer_id":43831870390332,"sku":"200-000-012-025","price":3820.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ Straight","offer_id":43831870423100,"sku":"200-000-012-026","price":3420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/2nd-Gen-Toyota-Tundra-Swing-Arm-Rear3.jpg?v=1768210119"},{"product_id":"toyota-sequoia-classic-rear-bumper-2023","title":"CBI Toyota Sequoia Classic Rear Bumper | 2023","description":"\u003cp\u003eThe all-new 2023 Toyota Sequoia Rear Bumper is engineered with steep trails and rugged terrain in mind. We know it’s not always easy driving a full-size rig off-road, so we constructed this American made bumper to seriously improve your vehicle’s rear exit angle – making it much easier to descend in steep areas and less risky to drop on your backend. In addition to better performance, the steel construction adds incredible strength and durability to your Sequoias tail, offering additional recovery points and mounting options for superior functionality. The wrap around design provides ultimate protection while adding style.\u003cbr\u003e\n\\n***Swing arms coming soon\u003c\/p\u003e","brand":"CBI","offers":[{"title":"Powder Coat Black","offer_id":43831874125884,"sku":"200-000-030-004","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal","offer_id":43831874158652,"sku":"200-000-030-003","price":2500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/The_Ultimate_Overlanding_Sequoia_TRD_Offroad_SEMA_2022_Hi-Res_7-scaled-1.jpg?v=1768210131"},{"product_id":"toyota-sequoia-swing-arms-add-on","title":"CBI Toyota Sequoia Swing Arms Add-On","description":"Swing arm addition for CBI Sequoia rear bumper.\r\\n\r\\n*Cannot be used without CBI rear bumper\r\\n\u003cul\u003e\r\\n \t\u003cli style=\"list-style-type: none;\"\u003e\r\\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CBI","offers":[{"title":"Powder Coat Black \/ Straight","offer_id":43831874191420,"sku":"200-000-030-006","price":1400.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ Straight","offer_id":43831874224188,"sku":"200-000-030-005","price":1200.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black \/ Angled","offer_id":43831874256956,"sku":"200-000-030-010","price":1400.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ Angled","offer_id":43831874289724,"sku":"200-000-030-009","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/Toyota-Sequoia-Rear-Swing-arm-add-on5.jpg?v=1768210131"},{"product_id":"toyota-tundra-classic-rear-bumper-2022-2025","title":"CBI Toyota Tundra Classic Rear Bumper | 2022-2025","description":"\u003ch3\u003eProduct Info\u003c\/h3\u003e\r\\nThe CBI Offroad Fab Tundra rear steel bumper is a great option for Tundra owners looking to upgrade the rear protection of their vehicle. One of the main benefits of this bumper is its durability and strength, as it is made from high-quality steel that can withstand impacts and protect the rear of your Tundra. Additionally, the rear bumper also provides additional clearance and protection for off-road driving, allowing you to tackle more rugged terrain with confidence. The bumper also features cutouts to integrate the factory blind-spot monitors and other sensors.  Furthermore, the rear steel bumper can give the Tundra a more rugged and aggressive look. Overall, the CBI Offroad Fab Tundra rear steel bumper is an excellent option for Tundra owners looking for added protection, off-road capability, and customization options for their vehicle.","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831874584636,"sku":"200-000-012-023","price":2000.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831874617404,"sku":"200-000-012-024","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/Tundra-rear.jpg?v=1768210134"},{"product_id":"nissan-frontier-rear-bumper-2022-2025","title":"CBI Nissan Frontier Rear Bumper | 2022-2025","description":"\u003cstrong\u003eUpgrade your 2022-2025 Nissan Frontier's rear end with CBI Offroad's Rear Bumper.\u003c\/strong\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eProvides protection and additional recovery points\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eFollows factory lines for a perfect fit\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eIntegrated receiver hitch\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eCompatible with factory sensors*\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eSteel body construction\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eCut-outs for additional flush fit lights (Baja Designs S2 pattern, Rigid SR-M)\u003c\/li\u003e\r\\n\u003c\/ul\u003e\r\\n\u003cstrong\u003eSwing Arms Sold Seperately \u003c\/strong\u003e\r\\n\r\\n*Sensors may require recalibration after installation.","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831886774332,"sku":"200-000-024-005","price":1530.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831886807100,"sku":"200-000-024-006","price":1710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/FrontierRear1.jpg?v=1768210231"},{"product_id":"nissan-frontier-bolt-on-swing-arms-2022-2025","title":"CBI Nissan Frontier Bolt on Swing Arms | 2022-2025","description":"\u003cstrong\u003eUpgrade your 2022-2025 Nissan Frontier's rear end with CBI Offroad's Rear Bumper.\u003c\/strong\u003e\r\\n\r\\n\u003cstrong\u003eSwing arms only. Bumper sold separately.\u003c\/strong\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e*Cannot be used without CBI rear bumper \u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDual Bolt-on Swing Arms\u003c\/span\u003e\u003c\/li\u003e\r\\n \t\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eProvides mounting space for a full-size spare tire, fuel, and other gear \u003c\/span\u003e\u003c\/li\u003e\r\\n\u003c\/ul\u003e","brand":"CBI","offers":[{"title":"Bare Metal \/ Straight","offer_id":43831886839868,"sku":"200-000-024-007","price":1350.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ Angled","offer_id":43831886872636,"sku":"200-000-024-009","price":1350.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black \/ Straight","offer_id":43831886905404,"sku":"200-000-024-008","price":1550.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black \/ Angled","offer_id":43831886938172,"sku":"200-000-024-010","price":1550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/FrontierRear1_750c366e-b496-4dc3-9e59-5590ab305131.jpg?v=1768210231"},{"product_id":"lexus-gx550-rear-bumper-2024","title":"CBI Lexus GX550 Rear Bumper | 2024","description":"\u003cstrong\u003eUpgrade your 2024 Lexus GX550's rear end with CBI Offroad's Rear Bumper.\u003c\/strong\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli\u003eWrap-around protection\u003c\/li\u003e\r\\n \t\u003cli\u003eIntegrated recovery points\u003c\/li\u003e\r\\n \t\u003cli\u003eSolid 7GA steel construction\u003c\/li\u003e\r\\n \t\u003cli\u003eIntegrated hitch receiver\u003c\/li\u003e\r\\n \t\u003cli\u003eRetain factory blind spot monitors and proximity sensors*\u003c\/li\u003e\r\\n \t\u003cli\u003eCut-outs for additional flush fit reverse lights (Baja Designs S2 pattern, Rigid SR-M )\u003c\/li\u003e\r\\n\u003c\/ul\u003e\r\\n*Sensors may require calibration after installation.","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831887036476,"sku":"200-000-016-009","price":2000.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831887069244,"sku":"200-000-016-010","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/GX550Updated.jpg?v=1768210232"},{"product_id":"lexus-gx550-dual-swing-arm-add-on-2024","title":"CBI Lexus GX550 Dual Swing Arm Add On | 2024","description":"\u003cstrong\u003eDual Swing Arm Add-On For GX550 Rear Bumper\u003c\/strong\u003e\r\\n\u003cul\u003e\r\\n \t\u003cli aria-level=\"1\"\u003e2 Bolt-on Swing Arms\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eDual Swing Arms\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eStraight or Angled Tire Carrier\u003c\/li\u003e\r\\n \t\u003cli aria-level=\"1\"\u003eBare Metal or Powder Coat Black\u003c\/li\u003e\r\\n\u003c\/ul\u003e\r\\n\u003cstrong\u003e*Swing Arms Only*\u003c\/strong\u003e","brand":"CBI","offers":[{"title":"Bare Metal","offer_id":43831887102012,"sku":"200-000-016-007","price":1620.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":43831887134780,"sku":"200-000-016-008","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/GX550Rear-SA-1.jpg?v=1768210233"},{"product_id":"2017-2025-ford-super-duty-spec-series-rear-bumper","title":"DV8 Offroad 2017-2025 Ford Super Duty Spec Series Rear Bumper","description":"DV8 Offroad’s Super Duty Spec Series Rear Bumper delivers full-width rear protection for F250, F350, and F450 models. It supports two 3\" pod lights, retains factory sensors, license plate lights, and works with the OEM hitch. Features welded zip-tie tabs for clean wiring and satin Spec Series mesh inserts. Finished in micro-texture black powder coat. Bolt-on installation with very minor trimming required. Not compatible with drop-down side steps.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with F250\/F350\/F450 models\u003c\/li\u003e\n\u003cli\u003eFull width design for protection and full coverage offroad\u003c\/li\u003e\n\u003cli\u003eLight mounting options for (2) 3\" pods for additional lighting on the trail\u003c\/li\u003e\n\u003cli\u003eWelded-in zip tie tabs for wire management\u003c\/li\u003e\n\u003cli\u003eContains satin powder coated Spec Series mesh inserts\u003c\/li\u003e\n\u003cli\u003eFactory Hitch compatible\u003c\/li\u003e\n\u003cli\u003eRetains the use of factory sensors and license plate lights\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design - Very Minor Trimming Required\u003c\/li\u003e\n\u003cli\u003eNot Compatible with Drop Down Side Step\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43920898097212,"sku":"RBFF2-03","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/RBFF2-03_Installed-1.jpg?v=1774002667"},{"product_id":"2017-2020-ford-f-150-raptor-tube-rear-bumper","title":"DV8 Offroad 2017-2020 Ford F-150 Raptor Tube Rear Bumper","description":"DV8 Offroad’s Raptor Tube Rear Bumper features a lightweight, low-profile build. Compatible with the factory hitch and includes welded zip-tie tabs for clean wiring. Supports (2) 3\" pod lights but maintains a clean look without them. Direct bolt-on install with minor trimming. Finished in a micro-texture black powder coat.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSleek prerunner type design\u003c\/li\u003e\n\u003cli\u003ePriced without the \"Raptor Tax\"\u003c\/li\u003e\n\u003cli\u003eLow profile lightweight design that complements the aggressive look and feel of the Ford Raptor\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eCompatible With Factory Hitch\u003c\/li\u003e\n\u003cli\u003eDirect Fit\/Bolt-On Design. Very Minor Trimming Required\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e(2) 3\" pod light mounts, however looks just as good without the light\u003c\/li\u003e\n\u003cli\u003eParking sensors included for 2017-2018 models, and will use OEM for 2019-2020 models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43920898129980,"sku":"RBFR1-01","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/RBFR1-01_Installed-1.jpg?v=1774002732"},{"product_id":"2025-ram-rho-phantom-rear-bumper","title":"Addictive Desert Designs 2025 Ram RHO Phantom Rear Bumper","description":"2025 Ram RHO Phantom Rear Bumper features an aggressive Knife’s Edge design with a low-profile fit. Includes mounts for (2) 10” single-row light bars and retains OEM sensors and driver assist functions. Finished in durable Hammer Black powder coat with satin black panels. Direct bolt-on installation. Made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKnife's Edge Design\u003c\/li\u003e\n\u003cli\u003eAggressive Styling\u003c\/li\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003eIntegrated Side Pod Light Mounts For (2) Single Row 10\" Light Bars (1 In Each Side)\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eCompatible With Hands-Free Driving Assist And All Other OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powder Coat With Satin Black Panels\u003c\/li\u003e\n\u003cli\u003eProudly Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43920898621500,"sku":"R630191190103","price":1898.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R63019119010.01.jpg?v=1774003210"},{"product_id":"2021-2025-ford-bronco-rear-tube-bumper","title":"DV8 Offroad 2021-2025 Ford Bronco Rear Tube Bumper","description":"The 2021–2025 Ford Bronco Rear Tube Bumper features a sleek prerunner design with mounts for two 3” light pods. It’s compatible with the factory hitch, fits up to a 37” spare tire, and installs easily with a direct bolt-on fit. Finished in a durable micro-texture black powder coat with a CNC-etched logo for a clean, rugged look.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides Mounting Options for (2) 3” Light Pods\u003c\/li\u003e\n\u003cli\u003eSleek prerunner type design\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eCompatible With Factory Hitch\u003c\/li\u003e\n\u003cli\u003eDirect Fit Bolt-On Design\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eCNC etched logo\u003c\/li\u003e\n\u003cli\u003eUp to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper.\u003c\/li\u003e\n\u003cli\u003eTo keep full visibility of the third brake light with a 37\" spare, use our third brake light extension.\u003c\/li\u003e\n\u003cli\u003eParking sensor equipped vehicles require MCFSNSR-01\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43920899211324,"sku":"RBBR-08","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/RBBR-08_Installed-1.jpg?v=1774003569"},{"product_id":"2025-ram-rho-stealth-fighter-rear-bumper","title":"Addictive Desert Designs 2025 Ram RHO Stealth Fighter Rear Bumper","description":"Upgrade your Ram RHO with aggressive styling and unmatched functionality. The Stealth Fighter Rear Bumper features integrated cube light mounts, heavy-duty 1\" D-ring clevis mounts, and full compatibility with OEM parking sensors and driver assist systems. Finished in a durable hammer black powder coat with satin black panels, it installs easily with supplied hardware and is proudly made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAggressive Styling\u003c\/li\u003e\n\u003cli\u003eIntegrated Side Pod Light Mounts For (2) Universal Cube Lights (1 In Each Side)\u003c\/li\u003e\n\u003cli\u003eIncludes (2) 1\" Thick CNC D-Ring Clevis Mounts For A 3\/4\" Pin D-Ring\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eCompatible With Hands-Free Driving Assist And All Other OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powder Coat With Satin Black Panels\u003c\/li\u003e\n\u003cli\u003eProudly Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43920899932220,"sku":"R630081280103","price":1798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R630081280103-01.jpg?v=1774004076"},{"product_id":"2025-ram-rho-bomber-rear-bumper","title":"Addictive Desert Designs 2025 Ram RHO Bomber Rear Bumper","description":"The 2025 Ram RHO Bomber Rear Bumper brings bold styling and everyday function. It features mounts for two cube lights, keeps OEM sensors and tow hooks, and works seamlessly with all driver-assist systems. Built tough with a hammer black powder coat and satin black panels, it installs easily with supplied hardware and is proudly made in the USA\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAggressive Styling\u003c\/li\u003e\n\u003cli\u003eIntegrated Side Pod Light Mounts For (2) Universal Cube Lights (1 In Each Side)\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM Tow Hooks\u003c\/li\u003e\n\u003cli\u003eCompatible With Hands-Free Driving Assist And All Other OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003eDirect Fitment Using Supplied Hardware For Easy Installation\u003c\/li\u003e\n\u003cli\u003eDurable Hammer Black Powder Coat With Satin Black Panels\u003c\/li\u003e\n\u003cli\u003eProudly Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43920899964988,"sku":"R630141280103","price":1998.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R630141280103-01.jpg?v=1774004099"},{"product_id":"rago-fabrication-2022-2025-rivian-r1t-rear-bumper","title":"Rago Fabrication 2022-2025 Rivian R1T Rear Bumper","description":"Our Rear Bumper features two pod light mounts, and it provides a low-profile design with a trim fitment. The bumper is made from durable steel, and it is finished in a 2-stage hammer black powder coat with satin black accent panels. The bumper retains all of your R1T’s OEM drive assist sensors. Included with the bumper are two heavy-duty 3\/16-inch skid plates that shield the rear undercarriage. Made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003ePair of 3” Pod Light Mounts\u003c\/li\u003e\n\u003cli\u003e(2) Heavy-Duty 3\/16” Rear Skid Plates\u003c\/li\u003e\n\u003cli\u003eRetains All OEM Drive Assist Features\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Powder Coated Accent Panels\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":43920901570620,"sku":"R9402312801NA","price":2498.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R9402312801NA-Installed-1.jpg?v=1774005247"},{"product_id":"dv8-offroad-2024-2025-toyota-tacoma-spec-series-rear-bumper","title":"DV8 Offroad 2024-2025 Toyota Tacoma Spec Series Rear Bumper","description":"Our Rear Bumper features a full-width design and two 3-inch pod light mounts. Our bumper is made from steel, and it is finished in a micro-texture black powder coat with satin black accent panels. The bumper provides welded-in zip tie tabs for wire management. Our bumper is compatible with the factory hitch, and it can be paired with our D-Ring Mounts for more recovery options. The bumper retains the factory sensors, blind spot monitoring, and license plate lights.\n\n* Please Note: Minor trimming is required for installation.\n\n** Please Note: The Spec Series is not compatible with TRD Pro or Trail Hunter models equipped with an OEM ARB Rear Bumper.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-Width Design\u003c\/li\u003e\n\u003cli\u003e(2) 3” Pod Light Mounts\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ OEM Hitch\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensors \u0026amp; Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM License Plate Lights\u003c\/li\u003e\n\u003cli\u003eWelded-In Zip Tie Tabs\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Mesh Accent Panels\u003c\/li\u003e\n\u003cli\u003e3.5\/5mm Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43920901996604,"sku":"RBTT1-08","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/RBTT1-08_Installed-1.jpg?v=1774005499"},{"product_id":"rago-fabrication-2025-toyota-4runner-center-mount-rear-bumper","title":"Rago Fabrication 2025+ Toyota 4Runner Center Mount Rear Bumper","description":"Our Rear Bumper provides a low-profile design and two pod light mounts that can run Baja Designs S2 or RIGID SR-M lights. It is finished in a 2-stage hammer black powder coated finish. The bumper retains the OEM blind spot monitoring and parking sensors. Made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(2) Mounts for S2 or SR-M Pod Lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":43920902651964,"sku":"R710255090103","price":998.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R710255090103.PT001.jpg?v=1774005958"},{"product_id":"rago-fabrication-2022-2025-toyota-tundra-rear-bumper","title":"Rago Fabrication 2022-2025 Toyota Tundra Rear Bumper","description":"Our Rear Bumper features a low-profile fitment and two pod light mounts. Our bumper comes in two variations: with two 1-inch thick D-ring mounts and without D-ring mounts. It is made from steel, and is finished in a 2-stage hammer black powder coat. The bumper retains the factory parking sensors and blind spot monitoring. Made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(2) Mounts for Baja Designs S2 or RIGID SR-M Pod Lights\u003c\/li\u003e\n\u003cli\u003eOptional 1” Thick D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003eRetains OEM Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":43920902783036,"sku":"R7602850901NA","price":1299.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R7602850901NA_Installed_1.jpg?v=1774006127"},{"product_id":"rago-fabrication-2022-2025-toyota-tundra-rear-bumper-1","title":"Rago Fabrication 2022-2025 Toyota Tundra Rear Bumper","description":"Our Rear Bumper features a low-profile fitment and two pod light mounts. Our bumper comes in two variations: with two 1-inch thick D-ring mounts and without D-ring mounts. It is made from steel, and is finished in a 2-stage hammer black powder coat. The bumper retains the factory parking sensors and blind spot monitoring. Made in the USA.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003e(2) Mounts for Baja Designs S2 or RIGID SR-M Pod Lights\u003c\/li\u003e\n\u003cli\u003eRetains OEM Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003eDurable Steel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":43920902815804,"sku":"R7602850901NA","price":1299.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R7602850901NA_Installed_1_fdfb1ee2-88aa-4fc1-96d4-f2ae35d1b082.jpg?v=1779111724"},{"product_id":"addictive-desert-designs-2022-2025-toyota-tundra-black-label-rear-bumper","title":"Addictive Desert Designs 2022-2025 Toyota Tundra Black Label Rear Bumper","description":"Our Rear Bumper offers a low-profile fitment and satin black accent panels. It is compatible with the OEM parking sensors, blind spot monitoring, license plate lights, and rear lights. The bumper is finished in a 2-stage hammer black powder coat, and it is made from steel. The bumper is straightforward to install. Made in the USA.\n\n* Please Note: Trimming is required for installation.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAggressive Plate Steel Design\u003c\/li\u003e\n\u003cli\u003eLow-Profile Fitment\u003c\/li\u003e\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM Blind Spot Monitoring\u003c\/li\u003e\n\u003cli\u003eRetains OEM License Plate \u0026amp; Rear Lights\u003c\/li\u003e\n\u003cli\u003e2-Stage Hammer Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eSatin Black Accent Panels\u003c\/li\u003e\n\u003cli\u003eSteel Construction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43920904912956,"sku":"R76020NA0103","price":1398.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/R76020NA0103.PT001.jpg?v=1774008136"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-dual-swing-arms-includes-tire-carrier-raw-unfinished","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907436092,"sku":"1100-4110-DUAL","price":3988.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-DUAL-01NA.01.jpg?v=1774009940"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-dual-swing-arms-includes-tire-carrier-hammer-black-powder-coat","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907468860,"sku":"1100-4110-DUAL-01NA","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-DUAL-01NA.01_683c4e94-2318-41d7-be97-bbb3abd4f5bb.jpg?v=1774009997"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-half-length-swing-arm-passenger-side-pivot-raw-unfinished","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907501628,"sku":"1100-4110-HALF","price":3323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-HALF-01NA.01.jpg?v=1774010027"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-half-length-swing-arm-passenger-side-pivot-hammer-black-powder-coat","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907534396,"sku":"1100-4110-HALF-01NA","price":3759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-HALF-01NA.01_a40a8b9f-6858-4245-b7d9-25664eea4789.jpg?v=1774010058"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-none-swing-arms-cannot-be-added-later-raw-unfinished","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907567164,"sku":"1100-4110-NS","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/4Runner-Overland-Series-Rear-Bumper-5th-Gen-2010-2024.01_10505f7a-0ec4-43be-a56a-9acfcf5fd825.jpg?v=1774010063"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-none-swing-arms-cannot-be-added-later-hammer-black-powder-coat","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907599932,"sku":"1100-4110-NS-01NA","price":2799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/4Runner-Overland-Series-Rear-Bumper-5th-Gen-2010-2024.01_9c83a60f-fb6d-4a0a-ab08-05692e6d6c50.jpg?v=1774010069"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-single-full-length-swing-arm-includes-tire-carrier-passenger-side-pivot-raw-unfinished","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907632700,"sku":"1100-4110-SINGLE-P","price":3498.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-SINGLE-P-01NA.01.jpg?v=1774010083"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-single-full-length-swing-arm-includes-tire-carrier-passenger-side-pivot-hammer-black-powder-coat","title":"C4 Fabrication 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with 2021+ BSM\u003c\/li\u003e\n\u003cli\u003eNOT Compatible with Parking Sensors on some Models\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/li\u003e\n\u003cli\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/li\u003e\n\u003cli\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/li\u003e\n\u003cli\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/li\u003e\n\u003cli\u003eSwing-Out fits up to a 35″ Tire.\u003c\/li\u003e\n\u003cli\u003eIncludes a license plate mount kit with light.\u003c\/li\u003e\n\u003cli\u003eRetains camera functionality.\u003c\/li\u003e\n\u003cli\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/li\u003e\n\u003cli\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/li\u003e\n\u003cli\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/li\u003e\n\u003cli\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/li\u003e\n\u003cli\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/li\u003e\n\u003cli\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/li\u003e\n\u003cli\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eOptional Rotopax Mount\u003c\/li\u003e\n\u003cli\u003eOptional Hi-Lift Jack Mount\u003c\/li\u003e\n\u003cli\u003eOptional Jerry Can Holder\u003c\/li\u003e\n\u003cli\u003eOptional Reverse Camera Mount\u003c\/li\u003e\n\u003cli\u003eOptional Ham Antenna Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920907665468,"sku":"1100-4110-SINGLE-P-01NA","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1100-4110-SINGLE-P-01NA.01_58b621f4-7389-4d81-8acb-677e4407a331.jpg?v=1774010097"},{"product_id":"tacoma-overland-rear-bumper-2nd-gen-2005-2015-raw-unfinished","title":"C4 Fabrication Tacoma Overland Rear Bumper \/ 2nd Gen \/ 2005-2015","description":"Easy installation, 100% bolt on, no cutting or welding required.\nIntegrated receiver hitch for maximum clearance.\nAllows for a much better departure angle because of the low profile design and integrated hitch.\nFlip up license plate bracket included for easy access to hitch and trailer plug.\nLED license plate light included.\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\nWeighs 100lbs.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003eIntegrated receiver hitch for maximum clearance.\u003c\/li\u003e\n\u003cli\u003eAllows for a much better departure angle because of the low profile design and integrated hitch.\u003c\/li\u003e\n\u003cli\u003eFlip up license plate bracket included for easy access to hitch and trailer plug.\u003c\/li\u003e\n\u003cli\u003eLED license plate light included.\u003c\/li\u003e\n\u003cli\u003eRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003e3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eWeighs 100lbs.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913825852,"sku":"1200-4205","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4205-01NA.01.jpg?v=1774013986"},{"product_id":"tacoma-overland-rear-bumper-2nd-gen-2005-2015-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Rear Bumper \/ 2nd Gen \/ 2005-2015","description":"Easy installation, 100% bolt on, no cutting or welding required.\nIntegrated receiver hitch for maximum clearance.\nAllows for a much better departure angle because of the low profile design and integrated hitch.\nFlip up license plate bracket included for easy access to hitch and trailer plug.\nLED license plate light included.\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\nWeighs 100lbs.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003eIntegrated receiver hitch for maximum clearance.\u003c\/li\u003e\n\u003cli\u003eAllows for a much better departure angle because of the low profile design and integrated hitch.\u003c\/li\u003e\n\u003cli\u003eFlip up license plate bracket included for easy access to hitch and trailer plug.\u003c\/li\u003e\n\u003cli\u003eLED license plate light included.\u003c\/li\u003e\n\u003cli\u003eRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003e3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eWeighs 100lbs.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913858620,"sku":"1200-4205-01NA","price":1859.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4205-01NA.01_d35b0f2c-383e-428b-afe4-a8bb056d84ba.jpg?v=1774014015"},{"product_id":"tacoma-overland-rear-bumper-3rd-gen-2016-2023-raw-unfinished","title":"C4 Fabrication Tacoma Overland Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Easy installation, 100% bolt on, no cutting or welding required.\nIntegrated receiver hitch for maximum clearance.\nAllows for a much better departure angle because of the low profile design and integrated hitch.\nNot compatible with BSM on newer Tacomas\nFlip up license plate bracket included for easy access to hitch and trailer plug.\nLED license plate light included.\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\nWeighs 100lbs.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003eIntegrated receiver hitch for maximum clearance.\u003c\/li\u003e\n\u003cli\u003eAllows for a much better departure angle because of the low profile design and integrated hitch.\u003c\/li\u003e\n\u003cli\u003eNot compatible with BSM on newer Tacomas\u003c\/li\u003e\n\u003cli\u003eFlip up license plate bracket included for easy access to hitch and trailer plug.\u003c\/li\u003e\n\u003cli\u003eLED license plate light included.\u003c\/li\u003e\n\u003cli\u003eRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003e3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eWeighs 100lbs.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913891388,"sku":"1200-4216","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4216-01NA.01.jpg?v=1774014059"},{"product_id":"tacoma-overland-rear-bumper-3rd-gen-2016-2023-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Easy installation, 100% bolt on, no cutting or welding required.\nIntegrated receiver hitch for maximum clearance.\nAllows for a much better departure angle because of the low profile design and integrated hitch.\nNot compatible with BSM on newer Tacomas\nFlip up license plate bracket included for easy access to hitch and trailer plug.\nLED license plate light included.\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\nWeighs 100lbs.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003eIntegrated receiver hitch for maximum clearance.\u003c\/li\u003e\n\u003cli\u003eAllows for a much better departure angle because of the low profile design and integrated hitch.\u003c\/li\u003e\n\u003cli\u003eNot compatible with BSM on newer Tacomas\u003c\/li\u003e\n\u003cli\u003eFlip up license plate bracket included for easy access to hitch and trailer plug.\u003c\/li\u003e\n\u003cli\u003eLED license plate light included.\u003c\/li\u003e\n\u003cli\u003eRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003e3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eWeighs 100lbs.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913924156,"sku":"1200-4216-01NA","price":1859.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4216-01NA.01_9b578ce0-7f98-4d76-aa4e-1b7a8d709548.jpg?v=1774014160"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-no-side-tubes-raw-unfinished","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913956924,"sku":"1200-4316-HC-NS","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-NS-01NA.01.jpg?v=1774014169"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-no-side-tubes-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920913989692,"sku":"1200-4316-HC-NS-01NA","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-NS-01NA.01_4b48b7bf-4c69-4954-bb27-cabdfebf0fc4.jpg?v=1774014176"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-add-side-tubing-raw-unfinished","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914022460,"sku":"1200-4316-HC-NS-ST","price":2648.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-NS-01NA.01_f9633d91-bbf5-4552-a4d7-12b780bf6b81.jpg?v=1774014186"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-add-side-tubing-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914055228,"sku":"1200-4316-HC-NS-ST-01NA","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-NS-01NA.01_b3abf9fb-d965-4955-9335-c212c9c5dfe1.jpg?v=1774014195"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-no-side-tubes-raw-unfinished","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914087996,"sku":"1200-4316-HC-Single-P","price":3398.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-Single-P-01NA.01.jpg?v=1774014219"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-no-side-tubes-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914120764,"sku":"1200-4316-HC-Single-P-01NA","price":3799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-Single-P-01NA.01_36b62440-83ad-470e-8a62-08752f540426.jpg?v=1774014243"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-add-side-tubing-raw-unfinished","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914153532,"sku":"1200-4316-HC-Single-P-ST","price":3647.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-Single-P-ST-01NA.01.jpg?v=1774014280"},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-add-side-tubing-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"This bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\n\nLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\n3\/4” thick D-ring tabs fully welded front and back come standard.\nComes standard with hidden hitch.\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\nLicense plate light included.\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\nAftermarket rear suspension\/lift recommended but not required.\n150lbs without swing arm, 250lbs with swing arm and accessories.\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/li\u003e\n\u003cli\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003c\/li\u003e\n\u003cli\u003e3\/4” thick D-ring tabs fully welded front and back come standard.\u003c\/li\u003e\n\u003cli\u003eComes standard with hidden hitch.\u003c\/li\u003e\n\u003cli\u003eLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003c\/li\u003e\n\u003cli\u003eLicense plate light included.\u003c\/li\u003e\n\u003cli\u003eAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003c\/li\u003e\n\u003cli\u003eAftermarket rear suspension\/lift recommended but not required.\u003c\/li\u003e\n\u003cli\u003e150lbs without swing arm, 250lbs with swing arm and accessories.\u003c\/li\u003e\n\u003cli\u003eJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914186300,"sku":"1200-4316-HC-Single-P-ST-01NA","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4316-HC-Single-P-ST-01NA.01_d9303d51-e380-4abb-8175-548f1e1275cd.jpg?v=1774014318"},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-double-tube-sides-raw-unfinished","title":"C4 Fabrication Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Fitment:\n\nBlind spot monitoring and parking sensors are NOT supported by this bumper\n\nThis bumper requires cutting of the rear side body panels\n\nProfessional installation is recommended but not required.\n\nFeatures:\n\nModular, 3 piece design with bolt-on bumper sides\n\nHidden hitch that does not interfere with ground clearance\n\nFlip up license plate to access receiver hitch and trailer wiring connection\n\nIncluded license plate light\n\n¾” Thick D-Ring clevis mounts provide recovery options\n\nWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nDual mounting points for Baja Design S1 pod lights\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/li\u003e\n\u003cli\u003eThis bumper requires cutting of the rear side body panels\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/li\u003e\n\u003cli\u003eHidden hitch that does not interfere with ground clearance\u003c\/li\u003e\n\u003cli\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/li\u003e\n\u003cli\u003eIncluded license plate light\u003c\/li\u003e\n\u003cli\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/li\u003e\n\u003cli\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eDual mounting points for Baja Design S1 pod lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914219068,"sku":"1200-4516-DT","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4516-DT-01NA.01.jpg?v=1774014339"},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-double-tube-sides-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Fitment:\n\nBlind spot monitoring and parking sensors are NOT supported by this bumper\n\nThis bumper requires cutting of the rear side body panels\n\nProfessional installation is recommended but not required.\n\nFeatures:\n\nModular, 3 piece design with bolt-on bumper sides\n\nHidden hitch that does not interfere with ground clearance\n\nFlip up license plate to access receiver hitch and trailer wiring connection\n\nIncluded license plate light\n\n¾” Thick D-Ring clevis mounts provide recovery options\n\nWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nDual mounting points for Baja Design S1 pod lights\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/li\u003e\n\u003cli\u003eThis bumper requires cutting of the rear side body panels\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/li\u003e\n\u003cli\u003eHidden hitch that does not interfere with ground clearance\u003c\/li\u003e\n\u003cli\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/li\u003e\n\u003cli\u003eIncluded license plate light\u003c\/li\u003e\n\u003cli\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/li\u003e\n\u003cli\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eDual mounting points for Baja Design S1 pod lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914251836,"sku":"1200-4516-DT-01NA","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4516-DT-01NA.01_51dcf769-e3a7-4c81-baa4-d992b7173d19.jpg?v=1774014367"},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-wide-double-tube-for-fiber-glass-raw-unfinished","title":"C4 Fabrication Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Fitment:\n\nBlind spot monitoring and parking sensors are NOT supported by this bumper\n\nThis bumper requires cutting of the rear side body panels\n\nProfessional installation is recommended but not required.\n\nFeatures:\n\nModular, 3 piece design with bolt-on bumper sides\n\nHidden hitch that does not interfere with ground clearance\n\nFlip up license plate to access receiver hitch and trailer wiring connection\n\nIncluded license plate light\n\n¾” Thick D-Ring clevis mounts provide recovery options\n\nWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nDual mounting points for Baja Design S1 pod lights\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/li\u003e\n\u003cli\u003eThis bumper requires cutting of the rear side body panels\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/li\u003e\n\u003cli\u003eHidden hitch that does not interfere with ground clearance\u003c\/li\u003e\n\u003cli\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/li\u003e\n\u003cli\u003eIncluded license plate light\u003c\/li\u003e\n\u003cli\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/li\u003e\n\u003cli\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eDual mounting points for Baja Design S1 pod lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914284604,"sku":"1200-4516-DT-W","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4516-DT-W-01NA.02.jpg?v=1774014387"},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-wide-double-tube-for-fiber-glass-hammer-black-powder-coat","title":"C4 Fabrication Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Fitment:\n\nBlind spot monitoring and parking sensors are NOT supported by this bumper\n\nThis bumper requires cutting of the rear side body panels\n\nProfessional installation is recommended but not required.\n\nFeatures:\n\nModular, 3 piece design with bolt-on bumper sides\n\nHidden hitch that does not interfere with ground clearance\n\nFlip up license plate to access receiver hitch and trailer wiring connection\n\nIncluded license plate light\n\n¾” Thick D-Ring clevis mounts provide recovery options\n\nWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nDual mounting points for Baja Design S1 pod lights\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/li\u003e\n\u003cli\u003eThis bumper requires cutting of the rear side body panels\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/li\u003e\n\u003cli\u003eHidden hitch that does not interfere with ground clearance\u003c\/li\u003e\n\u003cli\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/li\u003e\n\u003cli\u003eIncluded license plate light\u003c\/li\u003e\n\u003cli\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/li\u003e\n\u003cli\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eDual mounting points for Baja Design S1 pod lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914317372,"sku":"1200-4516-DT-W-01NA","price":1759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4516-DT-W-01NA.02_310c0d7b-3ce9-4b48-8cc9-f466432915dc.jpg?v=1774014413"},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-plate-sides-raw-unfinished","title":"C4 Fabrication Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023","description":"Fitment:\n\nBlind spot monitoring and parking sensors are NOT supported by this bumper\n\nThis bumper requires cutting of the rear side body panels\n\nProfessional installation is recommended but not required.\n\nFeatures:\n\nModular, 3 piece design with bolt-on bumper sides\n\nHidden hitch that does not interfere with ground clearance\n\nFlip up license plate to access receiver hitch and trailer wiring connection\n\nIncluded license plate light\n\n¾” Thick D-Ring clevis mounts provide recovery options\n\nWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nDual mounting points for Baja Design S1 pod lights\u003cbr\u003e\u003cbr\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFitment:\u003c\/li\u003e\n\u003cli\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/li\u003e\n\u003cli\u003eThis bumper requires cutting of the rear side body panels\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended but not required.\u003c\/li\u003e\n\u003cli\u003eFeatures:\u003c\/li\u003e\n\u003cli\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/li\u003e\n\u003cli\u003eHidden hitch that does not interfere with ground clearance\u003c\/li\u003e\n\u003cli\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/li\u003e\n\u003cli\u003eIncluded license plate light\u003c\/li\u003e\n\u003cli\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/li\u003e\n\u003cli\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003cli\u003eAdd-Ons:\u003c\/li\u003e\n\u003cli\u003eDual mounting points for Baja Design S1 pod lights\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43920914350140,"sku":"1200-4516-P","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3234\/7708\/files\/1200-4516-P-01NA.01.jpg?v=1774014420"}],"url":"https:\/\/autoexpedition.com\/collections\/rear-bumpers.oembed?page=4","provider":"Auto Expedition","version":"1.0","type":"link"}